Leather Creasing Iron REGAD F series Edge Polishing Tip Leather Burnisher Leather Creaser Leather Working Tool Burnishing Edges

F edged creasing tips in different sizes for regad handle used with electric creasing & edging machine. Please note, these accessories are fully compatible with all handles (1002, 1022, 1006, 1007) for regad creasing & edging machines.

The edge of the iron consists of two lines the guide and the creaser. As you can see in the picture, the guide is slightly longer than the creaser. The guide burnishes the side of the leather and gives you a control while creasing a line on the top of the leather. You can also use wax, paraffin or dye to finish the leather edge. This iron melts any type of compounds for finishing leather surfaces providing a great professional-looking result.

All regad irons are made entirely of steel and are carefully polished before being fitted with their heating resistance. These accessories are screwed directly into the regad handles. The size of the iron means the distance between the creasing and the guide lines of the iron or distance from the side of the leather to the creasing line. Crease distance from edge of leather - 0.5 mm (0.02).

Crease distance from edge of leather - 1 mm (0.04). F 2 model (most popular). Crease distance from edge of leather - 1.5 mm (0.06).

Crease distance from edge of leather - 2 mm (0.08). Crease distance from edge of leather - 2.5 mm (0.1).

Crease distance from edge of leather - 3 mm (0.12). Crease distance from edge of leather - 3.5 mm (0.14). Crease distance from edge of leather - 4 mm (0.16). Crease distance from edge of leather - 4.5 mm (0.18).

Crease distance from edge of leather - 5 mm (0.2). Crease distance from edge of leather - 5.5 mm (0.22). Crease thickness of all tools: 0.5 mm (0.02).

Total length of all tools - 67 mm (2.6). There are a lot of ways of using regad tools in leathercraft. With regad heating irons it is easy to polish leather surfaces, make professional edge finishing, paint decorative grooves on leather, make patterns. The variety of regad tools allows you to do a lot of specific work like cutting zipper, welding thread, smoothing watch strap holds. With regad heating tips it is easy to work with different types of leather and different shapes of patterns. For example, burnishing plate you can use while burnishing thick leather edges, fnmcr is used while creasing round leather corners, fc series irons generally is used while creasing tight curves. Regad tools are time-saving tools, which allow you to do the work much faster and with higher quality. You just need to turn on the machine m3000 or m6000, which regulate the power, attach the handle to this machine and screw the iron into handle. Regulate the power presicely to material you use and you can start working. This item is made of metal.